Never Gonna build Again

Odin845 said:
Yea!

I tried it again without the side panel and here is what I got after idling for 10 minutes at the system monitor screen.

CPU - 38C
Board - 27C
MCP - 73C

What is MCP, that looks like it is running hot. I guess I just have to use my computer without the side panel.
Click to expand...

The MCP is the northbridge, the Nvidia chipset. Those are good temps (MCE may be a little high). Don't worry about that right now. Try to install Windows. What did you do differently, besides removing side-panel? Did you re-apply thermal grease and heatsink? You need to know what you did for troubleshooting purposes. :)
 
Chipsets seem to run warm, just keep an eye on it. The only thing you can do for the MCP is buy a new cooler or apply new paste. But normally what comes on the chipsets factory are fine...
 
Most nForce 680i Mobos (like mine) come with a northbridge fan. You need to install it if you have one. It's not really optional. The fan looks like this:
 
There was a little fan that came with my mobo, but it said it was optional, is that what I need?

The only thing I did was I took of the heat sink and fan and put it back on.
 
Odin845 said:
There was a little fan that came with my mobo, but it said it was optional, is that what I need?

The only thing I did was I took of the heat sink and fan and put it back on.
Click to expand...

Actually, my manual says it's NOT optional - and it really isn't. Install it. It's easy. How's it goin' so far?
 
So I put the side panel on and this is what I got idling for 10 minutes at the system monitor screen.

CPU - 45C
Board - 28C
MCP - 70C

So are these okay or should I take off the side panel?
 
Odin845 said:
So I put the side panel on and this is what I got idling for 10 minutes at the system monitor screen.

CPU - 45C
Board - 28C
MCP - 70C

So are these okay or should I take off the side panel?
Click to expand...

Forget the side panel. Leave it on. Install an OS and make sure you do not receive a blue screen! :P If you don't, your hardware should be O.K.
 
Tried to install that little fan, but I don't have a small enough screwdriver, guess I'll have to wait 'til tomorrow to try it out.

Thanks for all the help everybody, you have been great help.
 
I am posting this on my new computer, windows installed okay.

What am I supposed to do now? I think i must have done something wrong because whenever i startup the computer, it goes the a black screen with white writing showing the specs of my computer and it says F1 to continues.

When i press f1 it says something about DMI and then says boot from cd and then it starts windows.
 
dont worry about dropping stuff on the mobo, i always end up dropping screws, screwdrivers, wireclippers, anvils and they always work. Motherboards are a lot stroger than people think
 
Odin845 said:
I am posting this on my new computer, windows installed okay.

What am I supposed to do now? I think i must have done something wrong because whenever i startup the computer, it goes the a black screen with white writing showing the specs of my computer and it says F1 to continues.

When i press f1 it says something about DMI and then says boot from cd and then it starts windows.
Click to expand...

Haha my computer has always done the F1 thing because i didnt know how to change it at first...then i realized other people couldnt get on my computer so i kept it to be used more like a password. Im still the only one that knows how to get passed it :D
 
You must log in or register to reply here.
Back
Top