Newly built pc doesnt work

T

TroyTRFC

New Member
Ive just finished building my pc i push the power button and the psu fan and cpu fan both spin once then stop, whats wrong? I made sure that i was very careful with the mobo.
 
Got the standoffs under the board and in the right places? Got the 4/8 pin CPU power connector plugged in?
 
If your runnning a video card/s have you got the power connector/s in? Could try resetting the bios with it unplugged and push the power buttom a few times to discharge the power supply, plug it back up and see what happens. What setup have you got? Power Supply too.
 
Z77a-g43 msi mobo
Corsair cx 600 psu
I5 3570k
Saphire hd 7850

I just removed the graphics and powered it up and it is working so what does this mean an what can i do to fix it
 
Then assume its either a bad video card or bad pci express slot. Check the bios to see if there is a default video setting to use dedicated card first and then onboard.
 
When you say it was working with the video card removed. Does that mean you were using the onboard and it booted?
 
Dont guess you have another card you could try in it? Try resetting the card and the PCIe power connector (use another one) again and see what happens. Could have been a loose connection.
 
You must log in or register to reply here.
Back
Top