linkin
VIP Member
So i decided to run 1525 FSB with some voltage increase
"FATAL ERROR: Rounding was 0.5, expected less than 0.4.
Hardware failure detected, consult stress.txt file"
I have heard that this is a RAM error? I am only running 850mhz. stock volts.
CPU on the other hand, pencil modded. Running @ 4Ghz with new cooler. idle voltage is 1.45-1.46 (set to 1.4375v in bios) and load (prime95) is 1.39v
Temps appear okay, 37c idle on both cores and 60c full load with prime95.
What should i do? Set RAM speed back to stock 800mhz or up the RAM volts? what about CPU volts?
"FATAL ERROR: Rounding was 0.5, expected less than 0.4.
Hardware failure detected, consult stress.txt file"
I have heard that this is a RAM error? I am only running 850mhz. stock volts.
CPU on the other hand, pencil modded. Running @ 4Ghz with new cooler. idle voltage is 1.45-1.46 (set to 1.4375v in bios) and load (prime95) is 1.39v
Temps appear okay, 37c idle on both cores and 60c full load with prime95.
What should i do? Set RAM speed back to stock 800mhz or up the RAM volts? what about CPU volts?
