ram voltages?

[CodeMinion]

where can i find this info.. i added +0.2V to my ram in bios just wanna make sure im till under 2.2v .. my ram is rated to run at 1.9v - 1.9v non overclock. when i look at PC wizards voltage i am seeing DIMM 3.3v i am hoping thats not my ram

 

[87dtna]

Your gigabyte board should have a utility.

Here's, easy tune6 download- (download from Asia, it's faster!)

http://www.gigabyte.us/Support/Motherboard/Utility_DownloadFile.aspx?FileType=Utility&FileID=86

 

[87dtna]

Oh and no 3.3v is not your ram, DIMM is something else.

 

[CodeMinion]

humm according to Easytune my ram has 2 timings 5-5-5-15 and 4-4-4-10

 

[87dtna]

humm according to Easytune my ram has 2 timings 5-5-5-15 and 4-4-4-10

No it's saying you can run 4-4-4-10 if you set your MHZ lower, probably 533 or even 400. It's not telling you what it is right now.

 

[87dtna]

Did it tell you what your voltage is?

 

[Aastii]

download CPU-Z

http://www.cpuid.com/cpuz.php

that shows you. On SPD at the bottom it has the stock vvoltages, just add + whatever you put on to it.

 

[87dtna]

download CPU-Z

http://www.cpuid.com/cpuz.php

that shows you. On SPD at the bottom it has the stock vvoltages, just add + whatever you put on to it.

That doesn't tell you what it's currently running. Right now I have my ram set to ''normal'', which is 1.6v. According to CPU-Z it says 1.5v should be the normal. According to the ram I have, 1.5-1.6v are both ''normal''.