Post your SuperPi Score!

Status
Not open for further replies.
ThatGuy16 said:
I got up to 4.707Ghz with 1.535v.

I haven't given up yet, I'd like to see someone get 4.7 at that voltage :D
Click to expand...

you have an unbelievable chip, no doubt. however, wolfdales just got a new E0 revision that can also clock really high with relatively low vcore. e8600 E0 does 4.4ghz without a sweat at around 1.3x vcore, and some got clocks higher than 6.0ghz using L2N. i guess new one extra multiplier helps, but it's mainly the E0.

i'm currently waiting about a month for all the current revisions to be depleted from stock, then i'll buy myself a new e8500 with E0 :D
 
WhiteFireDragon said:
you have an unbelievable chip, no doubt. however, wolfdales just got a new E0 revision that can also clock really high with relatively low vcore. e8600 E0 does 4.4ghz without a sweat at around 1.3x vcore, and some got clocks higher than 6.0ghz using L2N. i guess new one extra multiplier helps, but it's mainly the E0.

i'm currently waiting about a month for all the current revisions to be depleted from stock, then i'll buy myself a new e8500 with E0 :D
Click to expand...

i'd love to get my hands on an E0 stepping cpu, that and a 45nm quad as well. i guess i'll have to wait til after my HTPC & mATX builds.
 
Untitled11.jpg
Untitled-36.jpg
 
tighten up those timings soldier! should net you a few tenths at 4-4-4-12 if your ram can do it.[/QUOTE]

ive tried wont post lol
 
[-0MEGA-];1059162 said:
It's DDR3 remember.
Click to expand...
yeah i forgot. damn... what's up with these ddr3 machines not putting up numbers. we got one to like 10.1xx seconds but no 9s yet.

zer0_c00l said:
tighten up those timings soldier! should net you a few tenths at 4-4-4-12 if your ram can do it.
Click to expand...

ive tried wont post lol[/QUOTE]

yeah i just realized your ram wasn't ddr2. i guess just shoot for max fsb and cross your fingers.
 
bubblescivic said:
nice clock for an e2180... is that the max that you've gotten out of the cpu? i ask bc i will have one to fool with for a day or two before it's doomed to run at stock clock in an HTPC case for my gf's new 32" LCD TV
Click to expand...

i tinkered around with it a little. i've OC'ed it up to 3.5ghz, but have not tested any higher because temps were not acceptable on stock cooler. it seems to have an fsb wall of 400, so theoretically it should be able to reach 4ghz (400x10) if temps were not a problem. at the stock 2.0ghz, it undervolts to only .98v set in bios.
 
WhiteFireDragon said:
i tinkered around with it a little. i've OC'ed it up to 3.5ghz, but have not tested any higher because temps were not acceptable on stock cooler. it seems to have an fsb wall of 400, so theoretically it should be able to reach 4ghz (400x10) if temps were not a problem. at the stock 2.0ghz, it undervolts to only .98v set in bios.
Click to expand...

go buy a cooler!!!! and share:D
 
I get the same 38 or 39 seconds on my stock of 2.2Ghz, then oc at 2.6 I still get 38 or 39... Is this not enough of an overclock or is there something else?
 
R41Z3N said:
I get the same 38 or 39 seconds on my stock of 2.2Ghz, then oc at 2.6 I still get 38 or 39... Is this not enough of an overclock or is there something else?
Click to expand...

well AMD cpu's arent great at the Pi...they are good!!! but not at bench programs
 
With superPI I get around 20 seconds. With another program I can do 1m in 1.03 seconds. Funny. =p

Ill OC up to 3ghz and see if I ccan get myself higher up on the list.
 
Status
Not open for further replies.
Back
Top