Post Your Core2Duo Temps Here!

e6600
Stock Cooling
Idle:39C
Core0: 37C
Core1:36C

Load:45C
Core0:55C
Core1:55C

With Artic Cooling Freezer 7 Pro
Idle:35C
Core0:28C
Core1:29C

Load:41C
Core0:45C
Core1:44C

Room Temp 40-55C

All using Speedfan
 
e6600 [email protected]
Idle
Core0:34C
Core1:33C

Gaming:
Core0:45C
Core1:44C

100% TaT
Core:60C
Core1:60C

all using intel tat

I also changed my vcore voltage from stock:1.325 to 1.45? is that good voltage or too high. I ran two prime95 test for 7 hrs and no errors
 
as soon as i received my new heatsink i saw the temp readings at stock speed and it was idle on 15*C.
now at 3.7ghz idle is around 40*C.

Master Mind
 
Core2 E6600: Intel TAT

Idle: 35C
Full Load: 64C

are these temps OK? I just recently installed a new HSF, so it should take a while for the new paste to harden right?..


...Right?
 
36C is a fine idle temp, especially if thats the idle temp when it's overclocked. But even if it's not, it's fine.

What you really need to watch is the load temp.
 
36C is a fine idle temp, especially if thats the idle temp when it's overclocked. But even if it's not, it's fine.

What you really need to watch is the load temp.
Click to expand...

It isn't OC'ed. It load is about 52c, which I think is Ok...
Thanks.
 
52C load is a bit high, but it's nothing to really worry about. Do you have the Freezer 7 Pro cooler?
 
Hey guys. Here's an update. I'm currently at a stable (ran fine at the Small FFT test in orthos for about 8 hours) 3.16GHz on my E6600. Seems like right now the only thing keeping me back is heat. CURRENTLY Using the stock cooler and getting temps of...

Idle: 33C
50% Load: 41C
100% Load(8 hrs): Max 65C

BUT... the good news is my Tuniq Tower 120 LED is comming and should be here Wednesday. Im also getting a lapping kit with it and will lap it. I'll post what my results are once it's installed
 
Mine idle temp is 40*C of my E6300,while gaming 42*-43*C and while ripping a DVD 48*C(CPU usage 80-90%).Is this what you call load?Remember my room temp is quite hot and my case has only one exhaust fan at the back.But while ripping when I opened the case and put the case under ceilling fan it drop down to 42-43*C.Is this good temp?
 
You must log in or register to reply here.
Back
Top