How clean is your interior?

INTELCRAZY said:
What board is that? I know it's Intel.... My first and last Intel board was the DG965WH... bent capacitors after shipped and buggy drivers for XP, unstable after running idle overnight.
Click to expand...

It is an Intel D945PSN. Right now I have an ASUS P5B, I'm trying to sell my older Intel components and upgrade to a Core 2 Duo processor, but on a strict budget ;)
 
i redid mine today after seeing these pics, thanks guys :mad:

:P:P

here is what i had. with the flash on.

insidewithflash1.jpg

insidewithflash-1.jpg

insidewithflash7.jpg

externalwiring.jpg


new pics will be on l8er
 
Last edited:
Bradan ive always liked your interior. I like the 80 mm fan blowing onto the hard drive. Does this move much air? I ask because its attached to the bottom of the case so i wouldhave thought it didnt have any air to pull through.

Hope thats not too confusing
 
taylormsj said:
Bradan ive always liked your interior. I like the 80 mm fan blowing onto the hard drive. Does this move much air? I ask because its attached to the bottom of the case so i wouldhave thought it didnt have any air to pull through.

Hope thats not too confusing
Click to expand...

thanks!!! :D means allot

actually it moves quite a bit of air. it moves 26cfm, because i can set it on medium, opposed to the 120mm on low at 39cfm.

my case has 4 hard plastic feet and i made a riser for the case to get it off the carpet about an inch, doesnt impede any flow anymore. ill take some pics once i get batteries for the camera. :)

well you can kind of see it in the second sig pic. its a piece of wood under my case.

** just noticed we you beat me by a couple hudnred 3dmarks , gaming for us is similar , hah**

one more thing, my hdd runs at 27'c, dont know if thats good but the room temp is 22'c
 
Last edited:
Here's a quick shot of my new rig. It's just on the extra table I had until I move into my dorm in a couple weeks. I tried to do some cable management but I'll do some more once I get settled in...

My Rig's Specs:

Monitor....................22" Samsung 226BW widescreen
Case.......................Antec Nine Hundred
CPU........................Intel Core 2 Quad Q6600 w/ Zalman CNPS 9700
MoBo......................Gigabyte GA-965P-DS3
HDD........................Western Digital Raptor 150GB
OD.........................Lite-On LH-20A1S
GFX........................EVGA NVIDIA e-GeForce 8800GTS 320MB
RAM.......................4 GB Corsair XM2 DDR2 (4 x 1 GB)
PSU........................OCZ GameXStream 600 Watts
Speakers.................Logitech 5.1 THX Z-5300e 280 RMS Watts
OS.........................Windows Vista 64-Bit Home Premium

My Rig:

Computer01.jpg


Computer02.jpg
 
Bradan said:
thanks!!! :D means allot

actually it moves quite a bit of air. it moves 26cfm, because i can set it on medium, opposed to the 120mm on low at 39cfm.

my case has 4 hard plastic feet and i made a riser for the case to get it off the carpet about an inch, doesnt impede any flow anymore. ill take some pics once i get batteries for the camera. :)

well you can kind of see it in the second sig pic. its a piece of wood under my case.

** just noticed we you beat me by a couple hudnred 3dmarks , gaming for us is similar , hah**

one more thing, my hdd runs at 27'c, dont know if thats good but the room temp is 22'c
Click to expand...

That was my old 3d mark score with my sli'ed 7600gt - crap for gaming but realy good for benchmarks - id probably get like 4000 now with new graphics card (1950)

My hard drive is normally around 30 - 36 C so yeh that is good
but i keep it at the bottom of the cages for a clean case, cb to move it up and add fan now :D

My graphics card seems to be so short compared to everyone elses 1950 pro. Its like half the size lol.
 
Drunkship said:
Here's a quick shot of my new rig. It's just on the extra table I had until I move into my dorm in a couple weeks. I tried to do some cable management but I'll do some more once I get settled in...

My Rig's Specs:

Monitor....................22" Samsung 226BW widescreen
Case.......................Antec Nine Hundred
CPU........................Intel Core 2 Quad Q6600 w/ Zalman CNPS 9700
MoBo......................Gigabyte GA-965P-DS3
HDD........................Western Digital Raptor 150GB
OD.........................Lite-On LH-20A1S
GFX........................EVGA NVIDIA e-GeForce 8800GTS 320MB
RAM.......................4 GB Corsair XM2 DDR2 (4 x 1 GB)
PSU........................OCZ GameXStream 600 Watts
Speakers.................Logitech 5.1 THX Z-5300e 280 RMS Watts
OS.........................Windows Vista 64-Bit Home Premium

My Rig:

Computer01.jpg


Computer02.jpg
Click to expand...

Very clean desktop i like it.

No offense on your part but i hate the antec 900 for the reson that it is impossible to control the birds nest of the psu at the bottom , although it doesnt look untidy.

EDIT nice camera - managing to capture the zalman's fan with no blur woah :)
 
taylormsj said:
Very clean desktop i like it.

No offense on your part but i hate the antec 900 for the reson that it is impossible to control the birds nest of the psu at the bottom , although it doesnt look untidy.

EDIT nice camera - managing to capture the zalman's fan with no blur woah :)
Click to expand...

Yeah, I tried to tie back as many cables as possible together and if possible to the case itself. I actually stuffed a fair bit in the spare space on the bottom front.

Heh, the camera is actually only a 3.2 MP Sony CyberShot from a couple years ago...
 
Zangetsu said:
Is that a problem for a HDD if it is up side down? I wonder...

Zangetsu
Click to expand...

I doubt it.. I have dual HDD's mounted side-ways in my e-machines tower, it's just how they chose to do it.

If it reduced life-span, I'm sure the companies would be inclined to stop producing cases with that layout ;)
 
taylormsj said:
That was my old 3d mark score with my sli'ed 7600gt - crap for gaming but realy good for benchmarks - id probably get like 4000 now with new graphics card (1950)

My hard drive is normally around 30 - 36 C so yeh that is good
but i keep it at the bottom of the cages for a clean case, cb to move it up and add fan now :D

My graphics card seems to be so short compared to everyone elses 1950 pro. Its like half the size lol.
Click to expand...

agp 1950 pro?
 
You must log in or register to reply here.
Back
Top