I can change the Multi, but I can't remember what the other options are?
Nah, I'm good with this Shane!
It wont go up, so no use there
I can change the Multi, but I can't remember what the other options are?
Nah, I'm good with this Shane!
Your memory will handle 2.1volts , what are your timings set at ? I'm running my XMS at 2.1 volts but had to loosen my timings from 4-4-4-12 2T to 5-5-5-18 2T in order for a stable oc. I'm running my E6850 at 3700mhz . One other key change would be to bump up your NB voltage alittle.
Your memory will handle 2.1volts , what are your timings set at ? I'm running my XMS at 2.1 volts but had to loosen my timings from 4-4-4-12 2T to 5-5-5-18 2T in order for a stable oc. I'm running my E6850 at 3700mhz . One other key change would be to bump up your NB voltage alittle.
You have the 6400, were as I only have the 5400, maybe that's what's up? Also, what is your multiplyer at, mines locked at 7 and 6, 6 is pointless anyway
[-0MEGA-];915519 said:The RAM is only running at DDR2 808, voltage should not be an issue. It does not sound like a RAM issue to me.
I would also eventually lower the RAM timings, as those are very high. But I would wait until you get your processor where you want it first.