Project :: Dark_Water
- Thread starter Mankz_91
- Start date
Jakesteads
New Member
sweet project
Mankz_91
New Member
hello again, well sorta......
the reason i stopped doing this project, has been 'left by the road-side' i.e. i dumped her....
ive not done that much, as ive been trying to have as much fun as possible, but ive done a little bit over the last few days, which i'll post in a couple of minutes..
there should be lots of big/little updates over the next couple of weeks or so.......
AJ¬
the reason i stopped doing this project, has been 'left by the road-side' i.e. i dumped her....
ive not done that much, as ive been trying to have as much fun as possible, but ive done a little bit over the last few days, which i'll post in a couple of minutes..
there should be lots of big/little updates over the next couple of weeks or so.......
AJ¬
Mankz_91
New Member
Update :: Ive done some CNC today...!
Designing it on MAC...
some other minions...
The Laser cutter...
6mm Acrylic before cutting
Cutting in da machine'!
finished product
nice and shiny :dremel:
and now back to 'me time'... Banana Nesquick....Jam on Toast....Midget Gems....and Futerama.....
Designing it on MAC...
some other minions...
The Laser cutter...
6mm Acrylic before cutting
Cutting in da machine'!
finished product
nice and shiny :dremel:
and now back to 'me time'... Banana Nesquick....Jam on Toast....Midget Gems....and Futerama.....
Warriorhazzard
New Member
What Happened to this project. It ended in 2004???? Did it move somewhere else?
Rambo
New Member
Mankz_91
New Member
they have decided not to slice me open in the end
i just have to 'rest' it for a week or so..... :duh: but being almost 15, im not going to listen to them :naughty:
Anywho....im hoping to get my orderes put in tommorow for a whole load of watercooling and general modding bits..... :clap:
I did some marking out on the Mobo plate for where im gonna cut it. This will be so i can easily tighten/loosed the hold down for the TDX...
And some other random photos of the hardware.... (I love that RAM!!!)
and now back to killing people on BF2
i just have to 'rest' it for a week or so..... :duh: but being almost 15, im not going to listen to them :naughty:
Anywho....im hoping to get my orderes put in tommorow for a whole load of watercooling and general modding bits..... :clap:
I did some marking out on the Mobo plate for where im gonna cut it. This will be so i can easily tighten/loosed the hold down for the TDX...
And some other random photos of the hardware.... (I love that RAM!!!)
and now back to killing people on BF2
Mankz_91
New Member
......Anyway, I was getting all the other 'bits' ordered when i sorta realised i can't afford half of it.... So now, there is no aquatube ect. but i still ordered the barbs, however, i think i forgot to order the 8/10mm tubing :wallbash: :wallbash: :wallbash: :wallbash: :wallbash: :wallbash: :wallbash: :wallbash:
So, if i have, i'll have to go back to using my 1/2" ID tubing.... anyway im gonna get some more spray paint and filler to use on the front drivebays.....
but yesterday....::
I wanted the front door to look plain, so i wanted to get rid of the holes that show the HDD and Power LEDs.. (these are gonna be hooked up the LED's on some vandal switches -|- the Power one will go on the power switch -|- the HDD activity will go on the LED on the CC on off Vandal.....)
Because there are no LED's, i started sanding off the small images, and will dremel out the rest of the raised holes this afternoon....
So, if i have, i'll have to go back to using my 1/2" ID tubing.... anyway im gonna get some more spray paint and filler to use on the front drivebays.....
but yesterday....::
I wanted the front door to look plain, so i wanted to get rid of the holes that show the HDD and Power LEDs.. (these are gonna be hooked up the LED's on some vandal switches -|- the Power one will go on the power switch -|- the HDD activity will go on the LED on the CC on off Vandal.....)
Because there are no LED's, i started sanding off the small images, and will dremel out the rest of the raised holes this afternoon....
Mankz_91
New Member
first update of today....
i went out earlier and got my self some fairly cheap Bonbo / Car Body filler to use on the front bezels.....
I want the main front to look slightly plain, but flat and clean.... Im gopping to eventually get a small temp read-out to go next to the switches (which should be here tommorow morning......
This is my first experiance with filler, so i hope it looks good after some sanding.....
i went out earlier and got my self some fairly cheap Bonbo / Car Body filler to use on the front bezels.....
I want the main front to look slightly plain, but flat and clean.... Im gopping to eventually get a small temp read-out to go next to the switches (which should be here tommorow morning......
This is my first experiance with filler, so i hope it looks good after some sanding.....
Mankz_91
New Member
well, my filler hasn't dried...... so when my mum and my brother are out tommorow i can start doing some proper sanding....
i started drawing the mounting holes for the pump... im gonna try and use some M4 screws and bolts....
and heres a general shot of the random room where im working...
my packages should be here tommorow aswell.....
i started drawing the mounting holes for the pump... im gonna try and use some M4 screws and bolts....
and heres a general shot of the random room where im working...
my packages should be here tommorow aswell.....
Mankz_91
New Member
This morning, 3 of my 4 packages arrived.....
A load o' general Modding Stuff....
I was supprised how big this Heatsink was....
It didn't fit on becuase of my EK X18/19 so i cut down some of the smaller
fins...
i used some AS5 when mounting it instead of the funny stuff that came with it....
A load o' general Modding Stuff....
I was supprised how big this Heatsink was....
It didn't fit on becuase of my EK X18/19 so i cut down some of the smaller
fins...
i used some AS5 when mounting it instead of the funny stuff that came with it....
Mankz_91
New Member
Package 2....
im quiet annoyed because i didn't get my PSU silencer or my Molex extractors.... :sigh:
Package 3
when i opened the package, i found this...
but when i opened up the box i found this...
I like the look of the HDD silencer....
fit very nicely....
BUT... i ordered 2 right-angled barbs, 14 straight barbs, and some 'molex eyes'but only got one of ech of the barbs and non of the molex things....
so i hope they may come later today....
im quiet annoyed because i didn't get my PSU silencer or my Molex extractors.... :sigh:
Package 3
when i opened the package, i found this...
but when i opened up the box i found this...
I like the look of the HDD silencer....
fit very nicely....
BUT... i ordered 2 right-angled barbs, 14 straight barbs, and some 'molex eyes'but only got one of ech of the barbs and non of the molex things....
so i hope they may come later today....
Mankz_91
New Member
hush..........
im not fussed if the hardware is old...
i'll keep it for a while, get a mid range DX10 card and 2Gb of RAM eventually....
Im off to go sanding again now, then when my other package with the various cables and fans come, i can start putting it together....
Im gonna keep the inside of th case as it is for now, then may take it all out and get it painted at school....
@ Rambo...:: It was taken by my Brother....
im not fussed if the hardware is old...
i'll keep it for a while, get a mid range DX10 card and 2Gb of RAM eventually....
Im off to go sanding again now, then when my other package with the various cables and fans come, i can start putting it together....
Im gonna keep the inside of th case as it is for now, then may take it all out and get it painted at school....
@ Rambo...:: It was taken by my Brother....